GREEN woven roving 100% cellulose fiber (BIOMID)
BIOMID ®
- 100% HIGHLY CRISTALLINE CELLULOSE FIBER
- Made of Lumber Industry by-products
- Obtained by mechanical process(unlike Viscose rayon which is obtained by chemical reaction)
- BIOMID® is a 11µ filament diameter , 183 Tex roving Bobbins of 1 / 3 / 4.5 kgs
Main Features of BIOMID ® Fiber
- Almost half the weight of glass fiber, on-par in density with Aramid fiber
- Stable to 360°C, or about double most thermoplastics and native natural fibers
- Specific properties of BIOMID® laminates are often higher than those made of glass fiber
- Much less abrasive than glass fiber
- Translucent and Odourless (not opaque like traditional natural fibers)
- Volume of 183 Tex BIOMID® is similar to
- 3K Carbon fiber
- 1420 denier Aramid fiber
- 940 denier HMPP fiber
- 300 Tex e-glass roving
Comparison of BIOMID® Fiber with Glass and Bast Fibers
Property | Glass Fiber | BIOMID® | Traditional Natural Fibers | Comments |
---|---|---|---|---|
Light weight | 2.54 | 1.5 | 1.5 | Almost Half the weight |
Renewable | No | Yes | Yes | Glass is a mineral fiber |
Abrasive | Yes | No | No | Better worker comfort |
Biodegradable | No | Yes | Yes | End of service life disposal |
Uniform Properties | Yes | Yes | No | Uniform fiber = Uniform properties |
Continuous | Yes | Yes | No | Better Load transfer |
Thermal decomposition T° | High | High | Low | Permits use with higher melting point / curing resins |
Laminate | Translucent | Translucent | Opaque | Familiar appearance |
LAMINATE PROPERTIES
Construction: Plain weave fabrics, 11 layers, 3mm thickness
Resin system: VE resin, Press moulded, 50% resin content, post cured
Fiber | Tensile Strength ASTM D638 | Flexural Strength ASTM D790 | Flexural Modulus ASTM D790 | Density |
---|---|---|---|---|
Reference: Common FLAX | 86 MPa | 136 MPa | 7.3 GPa | 1.22 |
100% BioMid® | 144 Mpa | 237 MPa | 9.6 GPa | 1.23 |
50% BioMid®/ 50% E-glass | 243 MPa | 398 MPa | 16.6 GPa | 1.49 |
*Results can vary with different constructions, resins, curing conditions, etc…
Cost: BIOMID® /GLASS < BIOMID® < FLAX
TECHNICAL DATASHEET Of our 100% CELLULOSE FABRICS
Reference: | SFBIO 200 | |
---|---|---|
Weave / Armatura / Webart / Armure | 5 x BioMid 183 Tex | tress |
Warp / Ordito / Kette / Chaine | PLAIN / TELA / TAFFETAS | |
Weft/Trama /Schuss / Trame | 5,5 x Bio Mid 183 Tex | |
Edges / Legatura / Bindekette / Bordures | Hot melt / glass yarn | |
Weight / Gramatura / Densität / Masse surfacique (+/-5%) | G/m2 200g / m2 | ISO 3374 |
Inner core / Anima / Tube interne (diameter) | mm 76 / 152 | |
Standard width / Altezza/ Breite / Largeur (+/-2cm) | Cm 100 | |
Standard Length / Lunghezza / Länge / longueur (+/-5%) ML | ML 100 | |
Net weight / Peso netto / Gewicht / Poids net (+/-5%) | Kg 20 |
SFBIO 150TWILL
BIOMID FABRICS (TWILL) |
---|
N°: SF2014-50 |
Date of previous issue: |
Date of issue: 4/27/2017 |
Version: 1 |
Product type | Cellulose fiber Twill weave fabrics |
Denomination | SFBIO150TWILL |
Scrim weight | gr/mq. 150+/-10% |
Warp : Biomid
Technical characteristics | unit | target | ISO standard |
---|---|---|---|
Diameter | μ | 11 | ISO 1139:1973 |
Title | Tex | 183 | ISO 1139:1973 |
Number of yarn for cm | n° | 4 | optical |
Tensile Strength at break (dry) | N | 123 | ISO2062:2009 |
Elongation at break | % | 4,5+/-1% | ISO2062:2009 |
Weft : Biomid
Technical characteristics | unit | target | ISO standard |
---|---|---|---|
Diameter | μ | 11 | ISO 1139:1973 |
Title | Tex | 183 | ISO 1139:1973 |
Number of yarn for cm | n° | 4 | optical |
Tensile Strength at break (dry) | N | 123 | ISO2062:2009 |
Elongation at break | % | 4,5+/-1% | ISO2062:2009 |
unit | unit | target | |
Standard length | mtl | 100 | |
Standard width * | mm | 800 | |
Inside core diameter | mm | 3′ |
* Other widths available on demand
SFBIO 300TWILL
BIOMID FABRICS (TWILL) |
---|
N°: SF2014-49 |
Date of previous issue: |
Date of issue: 4/27/2017 |
Version: 1 |
Product type | Cellulose fiber Twill weave fabrics |
Denomination | SFBIO300TWILL |
Scrim weight | gr/mq. 307+/-10% |
Warp : Biomid
Technical characteristics | unit | target | ISO standard |
---|---|---|---|
Diameter | μ | 11 | ISO 1139:1973 |
Title | Tex | 183 | ISO 1139:1973 |
Number of yarn for cm | n° | 8.8 | optical |
Tensile Strength at break (dry) | N | 123 | ISO2062:2009 |
Elongation at break | % | 4,5+/-1% | ISO2062:2009 |
Weft : Biomid
Technical characteristics | unit | target | ISO standard |
---|---|---|---|
Diameter | μ | 11 | ISO 1139:1973 |
Title | Tex | 183 | ISO 1139:1973 |
Number of yarn for cm | n° | 8 | optical |
Tensile Strength at break (dry) | N | 123 | ISO2062:2009 |
Elongation at break | % | 4,5+/-1% | ISO2062:2009 |
unit | unit | target | |
Standard length | mtl | 100 | |
Standard width * | mm | 800 | |
Inside core diameter | mm | 3′ |
* Other widths available on demand
SFBIO 110
BIOMID FABRICS (TWILL) |
---|
N°: SF2014-51 |
Date of previous issue: |
Date of issue: 4/27/2017 |
Version: 1 |
Product type | Cellulose fiber plain weave fabrics |
Denomination | SFBIO110 |
Scrim weight | gr/mq. 110+/-10% |
Warp : Biomid
Technical characteristics | unit | target | ISO standard |
---|---|---|---|
Diameter | μ | 11 | ISO 1139:1973 |
Title | Tex | 183 | ISO 1139:1973 |
Number of yarn for cm | n° | 3 | optical |
Tensile Strength at break (dry) | N | 123 | ISO2062:2009 |
Elongation at break | % | 4,5+/-1% | ISO2062:2009 |
Weft : Biomid
Technical characteristics | unit | target | ISO standard |
---|---|---|---|
Diameter | μ | 11 | ISO 1139:1973 |
Title | Tex | 183 | ISO 1139:1973 |
Number of yarn for cm | n° | 3 | optical |
Tensile Strength at break (dry) | N | 123 | ISO2062:2009 |
Elongation at break | % | 4,5+/-1% | ISO2062:2009 |
unit | unit | target | |
Standard length | mtl | 100 | |
Standard width * | mm | 800 | |
Inside core diameter | mm | 3′ |
* Other widths available on demand
SFBIO 200
BIOMID FABRICS (TWILL) |
---|
N°: SF2014-52 |
Date of previous issue: |
Date of issue: 4/27/2017 |
Version: 1 |
Product type | Cellulose fiber plain weave fabrics |
Denomination | SFBIO200 |
Scrim weight | gr/mq. 200+/-10% |
Warp : Biomid
Technical characteristics | unit | target | ISO standard |
---|---|---|---|
Diameter | μ | 11 | ISO 1139:1973 |
Title | Tex | 183 | ISO 1139:1973 |
Number of yarn for cm | n° | 5.5 | optical |
Tensile Strength at break (dry) | N | 123 | ISO2062:2009 |
Elongation at break | % | 4,5+/-1% | ISO2062:2009 |
Weft : Biomid
Technical characteristics | unit | target | ISO standard |
---|---|---|---|
Diameter | μ | 11 | ISO 1139:1973 |
Title | Tex | 183 | ISO 1139:1973 |
Number of yarn for cm | n° | 5.5 | optical |
Tensile Strength at break (dry) | N | 123 | ISO2062:2009 |
Elongation at break | % | 4,5+/-1% | ISO2062:2009 |
unit | unit | target | |
Standard length | mtl | 100 | |
Standard width * | mm | 800 | |
Inside core diameter | mm | 3′ |
* Other widths available on demand
SFBIO 300
BIOMID FABRICS (TWILL) |
---|
N°: SF2014-53 |
Date of previous issue: |
Date of issue: 4/27/2017 |
Version: 1 |
Product type | Cellulose fiber plain weave fabrics |
Denomination | SFBIO300 |
Scrim weight | gr/mq. 290+/-10% |
Warp : Biomid
Technical characteristics | unit | target | ISO standard |
---|---|---|---|
Diameter | μ | 11 | ISO 1139:1973 |
Title | Tex | 183 | ISO 1139:1973 |
Number of yarn for cm | n° | 8 | optical |
Tensile Strength at break (dry) | N | 123 | ISO2062:2009 |
Elongation at break | % | 4,5+/-1% | ISO2062:2009 |
Weft : Biomid
Technical characteristics | unit | target | ISO standard |
---|---|---|---|
Diameter | μ | 11 | ISO 1139:1973 |
Title | Tex | 183 | ISO 1139:1973 |
Number of yarn for cm | n° | 8 | optical |
Tensile Strength at break (dry) | N | 123 | ISO2062:2009 |
Elongation at break | % | 4,5+/-1% | ISO2062:2009 |
unit | unit | target | |
Standard length | mtl | 100 | |
Standard width * | mm | 800 | |
Inside core diameter | mm | 3′ |
* Other widths available on demand
SFBIO 150UD
BIOMID FABRICS (TWILL) |
---|
N°: SF2014-55 |
Date of previous issue: |
Date of issue: 4/27/2017 |
Version: 1 |
Product type | Cellulose fiber fabrics |
Denomination | SFBIO 150UD |
Scrim weight | gr/mq. 150+/-10% |
Warp : Biomid
Technical characteristics | unit | target | ISO standard |
---|---|---|---|
Diameter | μ | 11 | ISO 1139:1973 |
Title | Tex | 183 | ISO 1139:1973 |
Number of yarn for cm | n° | 8 | optical |
Tensile Strength at break (dry) | N | 123 | ISO2062:2009 |
Elongation at break | % | 4,5+/-1% | ISO2062:2009 |
Weft : polyester yarn
Technical characteristics | unit | target | ISO standard |
---|---|---|---|
Diameter | μ | 11 | ISO 1139:1973 |
Title | Tex | 167 | ISO 1139:1973 |
Number of yarn for cm | n° | 2 | optical |
Tensile Strength at break (dry) | N | 123 | ISO2062:2009 |
Elongation at break | % | 4,5+/-1% | ISO2062:2009 |
unit | unit | target | |
Standard length | mtl | 100 | |
Standard width * | mm | 400 | |
Inside core diameter | mm | 3′ |
* Other widths available on demand
SFBIO 180UD
BIOMID FABRICS (TWILL) |
---|
N°: SF2014-56 |
Date of previous issue: |
Date of issue: 4/27/2017 |
Version: 1 |
Product type | Cellulose fiber fabrics |
Denomination | SFBIO 180UD |
Scrim weight | gr/mq. 177+/-5% |
Warp : Biomid
Technical characteristics | unit | target | ISO standard |
---|---|---|---|
Diameter | μ | 11 | ISO 1139:1973 |
Title | Tex | 183 | ISO 1139:1973 |
Number of yarn for cm | n° | 9.5 | optical |
Tensile Strength at break (dry) | N | 123 | ISO2062:2009 |
Elongation at break | % | 4,5+/-1% | ISO2062:2009 |
Weft : polyester yarn
Technical characteristics | unit | target | ISO standard |
---|---|---|---|
Diameter | μ | 11 | ISO 1139:1973 |
Title | Tex | 167 | ISO 1139:1973 |
Number of yarn for cm | n° | 2 | optical |
Tensile Strength at break (dry) | N | 123 | ISO2062:2009 |
Elongation at break | % | 4,5+/-1% | ISO2062:2009 |
unit | unit | target | |
Standard length | mtl | 100 | |
Standard width * | mm | 400 | |
Inside core diameter | mm | 3′ |
* Other widths available on demand
SFBIO 250UD
BIOMID FABRICS (TWILL) |
---|
N°: SF2014-54 |
Date of previous issue: |
Date of issue: 4/27/2017 |
Version: 1 |
Product type | Cellulose fiber fabrics |
Denomination | SFBIO 250UD |
Scrim weight | gr/mq. 256+/-5% |
Warp : Biomid
Technical characteristics | unit | target | ISO standard |
---|---|---|---|
Diameter | μ | 11 | ISO 1139:1973 |
Title | Tex | 183 | ISO 1139:1973 |
Number of yarn for cm | n° | 14 | optical |
Tensile Strength at break (dry) | N | 123 | ISO2062:2009 |
Elongation at break | % | 4,5+/-1% | ISO2062:2009 |
Weft : polyester yarn
Technical characteristics | unit | target | ISO standard |
---|---|---|---|
Diameter | μ | 11 | ISO 1139:1973 |
Title | Tex | 167 | ISO 1139:1973 |
Number of yarn for cm | n° | 2 | optical |
Tensile Strength at break (dry) | N | 123 | ISO2062:2009 |
Elongation at break | % | 4,5+/-1% | ISO2062:2009 |
unit | unit | target | |
Standard length | mtl | 100 | |
Standard width * | mm | 400 | |
Inside core diameter | mm | 3′ |
* Other widths available on demand
To download all Data Sheets including:
SFBIO 150TWILL
SFBIO 300TWILL
SFBIO110
SFBIO200
SFBIO300
SFBIO150UD
SFBIO180UD
SFBIO250UD
For more information, please contact us by filling out below form
Get a cost estimate
Please submit a detailed outline of your business requirement so that our team of experts could get in touch with you with a customised product/service cost estimate within the next 48 hours.
Featured Products
Industrial Textiles
FRP Services & Company offices in 18+ cities in 12+ countries
Global Network
HEADQUARTERS
- FRP SERVICES & COMPANY FRP bldg., 1-15-9 Awaza, Nishi-ku, Osaka Japan 550-0011
- +81 (6) 6535-1933
- [email protected]
REGIONAL OFFICE
- FRP SERVICES & COMPANY KDX Nihonbashi Edo-dori Bldg, 8F 3-9-4, Nihonbashi-honcho, Chuo-ku, Tokyo Japan 103-0023
- +81 (0) 3 5643 8061
- [email protected]
INDIA
- FRP SERVICES & CO INDIA PVT LTD, F 104, Ascot Centre, Sahar Airport Road, Andheri - East, Mumbai India 400099
- +91-22-28351401
- [email protected]
SRI LANKA
PAKISTAN
- FRP SERVICES & COMPANY (P.L.O) Business Arcade, 3rd Floor, Suit# 309, Shahrah-e-Faisal, Karachi Pakistan 75400
- +92 (21) 3432 7632
- [email protected]
PHILIPPINES
- TY COMPOSITE INTERNATIONAL CORPORATION National Highway Teco Industrial Park, Brgy. Bundagul, Mabalacat City, Pampanga 2010 Philippines
- +63-45-403-9914
- [email protected]
VIETNAM
HANOI REPRESENTATIVE OFFICE
- FRP SERVICES & COMPANY Room 402,04th floor, Vinahud Building, Trung Yen 9 road, Cau Giay District, Hanoi, Vietnam.
- +84 (24) 3728 2357
- [email protected]
VIETNAM
HO CHI MINH OFFICE
- FRP SERVICES & COMPANY CSI Business Centre, Room 202, 2th Floor, Ben Thanh Building 70 Ly Tu Trong Str, Ben Thanh Ward, District 1,Ho Chi Minh City, Vietnam
- +84 (28) 3827 2199
- [email protected]
TAIWAN
- TAIPEI REPRESENTATIVE OFFICE 7F-9, No. 207, Tung-Hwa North Road, Taipei, Taiwan
- +886 (2) 2713 3111
- [email protected]
SINGAPORE
- FRP SERVICES (ASIA) PTE LTD. 24 Raffles Place #17-04A Clifford Centre Singapore 048621
- +65 6270 5001
- [email protected]
CHINA
- FRP SERVICES & CO. SHANGHAI OFFICE Shanghai International Trade Center, 25 #2508, 2201 Yan An Road (West), Shanghai 200336, China
- +86-21-6209-5907
- [email protected]
FRANCE
- FRP SERVICES EUROPE SARL Square de l’Arbois Bât. B3 565 Rue René Descartes, 13857 Aix-en-Provence Cédex3, France
- +33 (0) 4 4297 5910
- [email protected]
UAE - DUBAI
- FRP SERVICES & COMPANY MIDDLE EAST (BRANCH) 4WA, 628, Dubai Airport Free Zone, Dubai, UAE
- +971 (4) 204 5050
- [email protected]
NORTH AMERICA - USA
REGIONAL HEADQUARTERS
- FRP SERVICES & CO. (AMERICA) INC. 535 Fifth Avenue, Suite 1008, New York, NY 10017, U.S.A
- +1 (212) 695 8000
- +1 (212) 695 3100
- [email protected]
NORTH AMERICA – CANADA
REGIONAL BRANCH OFFICE
SOUTH AMERICA
BRAZIL REP OFFICE
- FRP SERVICES & CO. (AMERICA) INC. Avenida Pompeia, 634 - Suite 501, Vila Pompeia, São Paulo, CEP 05022-000 Brazil
- +55 (11) 3589 5749
- +55 (11) 3589 5709
- [email protected]
Meet Us
Contact
Industrial Textiles Division
Composites Division
Address: FRP SERVICES EUROPE SARL
Square de l’Arbois Bât.
B3 565 Rue René Descartes,
13857 Aix-en-Provence Cédex3,
France
Telephone: +33 (0)4 42 97 59 10
Fax: +33(0)442975920
Website: http://frpserv.com/eu-en
Email:
[email protected]