Fillers & Admixtures

Calcium Carbonate (Filler)
Aluminium Hydroxide (for Fire Retardant agent)
Thixotropic agents : Fumed silica (Reolosil), Tokusil, Finesil
Magnesium Oxide
Talc
Antimony Trioxide
Iron Oxide
Clay
Glass Powder
Glass Beads
Wollastonite

Fumed Silica

Sales specifications

Grade QS-09 QS-10
QS-10LS
QS-102 CP 102 QS-20
QS-20LS
QS-30 QS-30C QS-40
Appearance White powder
BET surface area (m²/g) 90+/-20 140+/-20 200+/-20 200+/-20 220+/- 20 300+/-30 300+/- 30 380 +/-30
Primary particle (m/m) 22 15 12 12 12 7 7 7
Bulk density (g/L) 50 50
40
50 100 50
40
50 100 50
Moisture content(Dry up, %) <1.5 <1.0 <1.5 <1.5 <1.5 <2.0 <2.0 <2.0
Ph(4% suspension) 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2
SiO²(%) >99.9 >99.9 >99.9 >99.9 >99.9 >99.9 >99.9 >99.9
Cl (ppm) <50 <50 <50 <50 <50 <50 <50 <50
Fe(ppm) <20 <20 <20 <20 <20 <20 <20 <20
Al(ppm) <20 <20 <20 <20 <20 <20 <20 <20
44um residue (%) <0.01 <0.01 <0.01 <0.01 <0.01 <0.01 <0.01 <0.01
Packaging (kg) 10 10 10 15 10 10 15 10

Hydroxypropil Methylcellulose

ShinEtsu

TYPE OF POLYMER

Hydroxypropyl Methylcellulose

1.Methyloxirane: REACH No.: 01-2119480483-35 :

2.Chlomethane: pre registration REACH No :05-2114650762-47 ( registration expected in 2013)

SPECIFICATIONS

Reference Methoxyl content (%) Hydroxypropoxyl content (%) Moisture (%) Ash content (Na2SO4) (%) Viscosity range (2%, 20°C) mPa
METOLOSE 90SH - 15000 19 - 24 '4 - 12 max. 5.0 max. 1.0 12,000 - 18,000

PACKAGING

METOLOSE 90SH-15000 is supplied in 4 plies paper bag (including three outside layers of craft paper and one internal layer of polyethylene film), each containing 20 kg net.

STORAGE

METOLOSE 90SH-15000 should be stored dry in its original packaging.
Storage temperature : max. 35 °C – Relative moisture : < 70 %

FRP Services Europe reserves the right to change the information given herein without prior notice. We believe this information to be reliable, but do not guarantee its applicability to the user’s process or assume liability for occurrence arising out of its use. The user, by accepting products described herein agrees to be responsible for thoroughly testing any application before committing to production. March 2007

WOLLASTONITE

PROPERTIES

Wollastonites are acicular mineral products milled to various morphologies and bulk densities. These products can be surface treated to enhance performance in thermoset and thermoplastic resins.
They increase mechanical properties (tensile, flexural, impact) and minimize distorsion at elevated temperatures, improve dimensional stability and provide low moisture absorption.

Component Weight %
CaO 46.70
SiO2 52.20
Fe2O3 0.15
Al2O3 0.25
MgO 0.20
Loss of Ignition 0.50

SPECIFICATIONS

Ref. Average Diameter (microns) Average Aspect Ratio Loose Bulk Density (g/cc) Tapped Bulk (g/cc) Appearance
400U 4.5 7.5 0.65 0.90 Powder
400S 4.5 7.5 0.67 0.95 Powder
400H 4.5 7.5 0.69 1.00 Powder
520U 5 20 0.25 0.43 Fiber
520S 5 20 0.32 0.50 Fiber
520H 5 20 0.37 0.59 Fiber
720U 5.5 20 0.32 0.60 Fiber
720S properties to be determined
720H 5.5 20 0.38 0.57 Fiber
800U 3 9 0.46 0.65 Powder
800S 3 9 0.49 0.66 Powder
800H 3 9 0.61 0.81 Powder
905U 9 5 0.72 1.10 Powder
905S 9 5 0.76 1.08 Powder
905H pproperties to be determined
915U 9 15 0.50 0.83 Fiber
915S 9 15 0.50 0.85 Fiber
915H 9 15 0.67 0.96 Fiber
1515U 15 15 0.66 1.15 Fiber
1515S 15 15 0.58 0.97 Fiber
1515H pproperties to be determined

GLASS BEADS

PROPERTIES

YWGB09# Series

Sandblasting glass bead is powered by compressed air to spray glass beads onto the surface of workpiece with high speed and high pressure for shot peening and polishing processing,
It’s mainly used for cleaning all kinds of molds such as punching, forging glass , rubber, plastic,metal casting,extrusion,etc.It can eliminate tensile stress,increase fatigue life and improve wear resistance Normally its hardness ≥5.5density 2.4-2.6g/cm³.

We supply the sandblasting glass bead as per American standard
MIL-G-9954A.
Applications
1. Semi-luster surface treatment on stainless steel products.
2. Clean and polish moulds for punching, forging, metal casting, glass products,rubber products and others.
3. Eliminate all kinds of machine parts tensile stress ,increase fagitue life and improve wear resistance.For instance, alrcraft engine turbine,blade,axis,undercarriage,as well as all kinds of spring,gear hydraulic parts,etc.
4. Clean semiconductor device and plastic sealed pair pipe before plating tin and remove edge and burrs.
5. Remove blockage in piston and cylinder.
6. Clean coil,brush,rotor and other spare parts when the motor and generator are overhauled.
7. Clean and deburr various metal pipes and nonferrous metal precise casting Shotblastingenhancement and polishina from textile machinery components.
8. Provide bright and sub glossy surface for medical apparatus instruments and automobile spare parts.

Item Mesh Diameter (micron)
YWGB01# 14-20 1400-850
YWGB02# 52.20 52.20
YWGB03# 20-30 850-600
YWGB04# 30-40 600-425
YWGB05# 40-50 425-300
YWGB06# 50-70 300-212
YWGB07# 60-80 250-180
YWGB08# 212-150 0.50
YWGB09# 90-150 180-125
YWGB10# 100-170 150-90
YWGB11# 120-200 125-75
YWGB12# 140-230 106-63
YWGB13# 170-325 90-45

PRODUCT DATA

Size (Diameter) Between 0 and 800 um (see table Standard Sizes)
Transformation temperature 549°C
Softening point (Littleton point) 734°C
Melting point 1446°C
Specific thermal Conductivity 1.129 W/(mK)
Thermal expansion 9.05 10-6 K1 120 °C1 (Coefficient of linear expansion α)
Specific thermal capatcity 1.329 kj/kg K [>600 °C]
Youngs-Module 63 GPa
Hardness according to Mohs ≥6
Specific gravity(g/cm3) 2.4-2.6
Refractive index ≥1.5
Spherical beads (%) ≥80
Arsenic <=200ppm
Lead <=200ppm
Antimony <=200ppm

PACKAGING

Packages just like the photo in right and the details are 25kgs/bag, 40bags/pallet, 20pallets per 20 feet container.

FRP Services Europe reserve the right to change the information given herein without prior notice. We believe this information to be reliable But we do not guarantee its applicability to the user’s process or assume liability for occurrence arising out of its use. The user, by accepting Products described herein, agrees to be responsible for thoroughly testing any application before committing to production.

For more information, please contact us by filling out below form

    Get a cost estimate

    Please submit a detailed outline of your business requirement so that our team of experts could get in touch with you with a customised product/service cost estimate within the next 48 hours.

    Featured Products

    Composites

    FRP Services & Company offices in 18+ cities in 12+ countries

    Global Network

    HEADQUARTERS
    REGIONAL OFFICE
    INDIA
    SRI LANKA
    PAKISTAN
    PHILIPPINES
    • TY COMPOSITE INTERNATIONAL CORPORATION National Highway Teco Industrial Park, Brgy. Bundagul, Mabalacat City, Pampanga 2010 Philippines
    • +63-45-403-9914
    • [email protected]
    VIETNAM
    HANOI REPRESENTATIVE OFFICE
    VIETNAM
    HO CHI MINH OFFICE
    • FRP SERVICES & COMPANY CSI Business Centre, Room 202, 2th Floor, Ben Thanh Building 70 Ly Tu Trong Str, Ben Thanh Ward, District 1,Ho Chi Minh City, Vietnam
    • +84 (28) 3827 2199
    • [email protected]
    TAIWAN
    SINGAPORE
    CHINA
    FRANCE
    UAE - DUBAI
    NORTH AMERICA - USA
    REGIONAL HEADQUARTERS
    NORTH AMERICA – CANADA
    REGIONAL BRANCH OFFICE
    SOUTH AMERICA
    BRAZIL REP OFFICE

    Meet Us

    Next Upcoming Event
    30 April 2024
    • 00

      days

    • 00

      hours

    • 00

      minutes

    • 00

      seconds

    Contact

    Composites Division

    Composites Division

    Address: FRP SERVICES EUROPE SARL
    Square de l’Arbois Bât.
    B3 565 Rue René Descartes,
    13857 Aix-en-Provence Cédex3,
    France

    Telephone: +33 (0)4 42 97 59 10
    Fax: +33(0)442975920

    Website: http://frpserv.com/eu-en
    Email: [email protected]